Driver fatigue monitor with signal output 45km/h start-up speed

Description

Why is driver fatigue a problem?
Every year, more than 1 million people die in traffic-related accidents around the world
and
research shows that driver fatigue (or drowsiness) contributes to about 25-33% of fatal and serious accidents
. This is equivalent to 300,000 lives or more lost every year.
For people aged between 15 and 29, road traffic accidents are the most common way to die

I/O and RS232 output optional:

I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.

RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.

Power input and output

1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm

Attention:

Non-authorized person, please do not open or repair the device.

Please do not operate the system when driving to avoid dangerous

Please handle carefully, do not drop or impact with hard objectives

Do not use chemicals or cleaning agents to clean the machine, it will damage the machine surfaces or rust the paint.

keep it away from water or moist place, device will be rusted or shortcut in those area.

Do not rip, bend or squeezed the wiring by heavy object, or it will be hot to fire.

driver fatigue camera

driver fatigue system

Doze Alert Anti Sleep System Driver 2 Seconds Reflect Fatigue Driving Monitoring Images